Quatech Embedded Ethernet to Serial Servers
High performance OEM solution for serial to ethernet connectivity
Ideal for OEM solutions, custom enclosures and other situations where the external shell is not needed, Quatech Embedded Device Servers offer all the industry-leading features as an external line. Quatech's high performance device servers feature a PowerPC® from Freescale™. This processor is part of a world-class architecture that offers the lowest latency available anywhere. In addition, the auto-sensing 10/100 Ethernet interface, and Quatech's proven high-speed, 921k-baud serial technology offer the best performance in the industry and ensure that your critical business applications won't be harmed by data throughput issues.
Installation Wizard - Easy to set up and install, Quatech Device Servers are up and running on your network in 10 minutes or less. A unique Installation Wizard automatically searches for and identifies any Quatech unit attached to the network, even searching remote subnets if needed. No client software is installed on your PC, just a small set of drivers that configures each serial port as a new COM port on the PC. This allows software applications to access the attached serial device as they are designed to, with no custom programming needed. Simply point your software application to the new, "virtual" COM port and you're all set!
Serial Tunneling - Do you have two serial devices that communicate directly with each other and you wish to replace the short serial cable using the distances possible with Ethernet technology? The two serial devices will then communicate as if connected by a short serial cable; the Ethernet portion will be invisible to the devices.
Auto TCP feature - For remote service and monitoring applications, try our AutoTCP feature. The serial port can be set up to act as a TCP Client, requesting a connection whenever the serial device is attached and powered on or, if you prefer, whenever serial data is ready for upload to the host computer. You can leave the connection on, or disconnect from the host after a specified period. But when a service request from a remote monitoring PC (with a specified IP address) arrives, the device server will act as a TCP server, allow access to the serial device to the monitoring PC, and go back to Client mode when the Server session is finished.
Board layout: SSE DSE
Features
- Board-only, OEM solution
- Easy integration and configuration. PowerPC® microprocessor drives high throughput and industry's lowest latency
- Network enable RS-232 serial devices for remote access and control
- Remote Web browser-based configuration, administration and troubleshooting
- Auto-detecting 10/100 Mbps Ethernet with built-in TCP/IP
- Raw TCP and IntelliSock™ TCP socket services for custom applications
- Configure as TCP Server, TCP Client, or as both using the exclusive AutoTCP feature
- Serial Tunneling mode for connecting two serial devices over a network without a PC
- 1 or 2 independent RS-232 serial ports
- DB-9 models available
- Surge suppression package standard
- Virtual COM drivers for Windows Windows NT4/2000/XP/Vista/7 & Linux, other OS support via socket modes
- 5 year limited warranty
- External device servers (wired and wireless) also available
Detailed Specifications: Embedded Device Server Boards (wired)
| LAN Interface: |
10/100 BaseT (IEEE 802.3), auto-negotiation. RJ-45 Network connector |
| Serial Interface: |
RS-232 (EIA-232), asynchronous DTE configured with full modem control and hardware flow control |
| Serial Connectors: |
Standard DB-9 male for "D" models (see connector pinout) |
| OS Support: |
Windows NT/2000/XP/Vista/7 and Linux. Other OS support via Raw TCP and IntelliSock™ TCP socket services. |
| Data Rate: |
115.2 kbps max per port learn more about max data rates |
| UARTs: |
SSE: 16C550 with 16-byte FIFO
DSE/QSE/ESE: 16C750 with 64-byte FIFO |
| Receiver Input (RS-232): |
Input Voltage Rating: -15V to +15V
Receiver Skew: 120 ns (typical), 250 ns (max) |
| Parity, Stop bits: |
Parity Configurable as: None, Even, Odd
Data Bits Configurable as: 5, 6, 7, 8
Stop Bits Configurable as: 1, 1.5, 2 |
| Surge Suppression: |
Surge suppression is standard on EMB models. Surge suppressor is capable of sustaining up to 40-A peak, 8 x 20µs transient surges, a clamping voltage of 30V and a peak energy dissipation of 0.1 Joules. (NOTE: The "SS" option limits data rate to 115.2 kbps due to capacitive loading). |
| Hardware: |
Processor: Motorola MPC855T Dual CPU PowerPC®
SDRAM: 8 MB
FLASH Memory: 2 MB
Firmware stored in FLASH may be upgraded via LAN interface |
| Protocols and Software: |
Management Protocols: UDP, TCP/IP, HTTP, DHCP, ARP, SNMP, Raw TCP and IntelliSock™ TCP socket services
IP Configuration Methods: DHCP or Static IP set through Installation Wizard, Web browser interface or custom UDP datagram utility
Quatech Utilities: Windows-based Installation Wizard, Web browser-based Management Utility
Operating Modes & Protocols: Windows API COM, TTY, TCP Server, TCP Client, Serial Tunneling, AutoTCP, Raw TCP or Intellisock TCP Socket Services |
| Power Requirements: |
DC input, with Auto-sensing AC adapters provided for 100 VAC-240VAC, 50Hz-60Hz |
| Environment: |
Operating: 0°C to 70°C
Storage: -40°C to 70°C
Humidity: 10% to 90% non-condensing |
| Dimensions: |
Height: .61" (1.54 cm)
Width: 3.50" (8.89 cm)
Depth: 4.50" (11.43 cm) |
| Certifications: |
CE, FCC Class B |
|
Ethernet
Accessories
