|
|
 |
| Home
> Products > Ethernet > Ethernet Switches > Ethernet Media Converters > Ethernet media converters for industrial applications |
 |
Ethernet media converters for industrial applications
Increase Ethernet distance and protect against electrical interference
NEW! Gigabit Options
Features
- Multi-mode or single-mode models
- 10/100Base and 1000Base (Gigabit) models
- Auto negotiation of data rate and duplex modes
- MDI/MDI-X (auto-cross feature)
- LEDs for Power, Link/Activity, Data Rate, Duplex/Collision
- Dip switch configuration for
- Link-fault-pass-through (enabled or disabled)
- Data rates (auto or forced)
- Duplex modes (auto or forced)
Applications
- SCADA
- Traffic
- Water / Waste water
- Point-of-sale
- Warehousing
- Industrial automation
- Building automation
Extend Ethernet distances
Media converters do more than just convert copper Ethernet signals to fiber. They allow the Ethernet LAN to be extended
beyond the normal 100 meter limit. By using a pair of media converters, LANs can be extended up to 2km with multi-mode
fiber and up to 20km with single-mode fiber. Extension of LAN distances now make it possible to communicate with remotely
located Ethernet enabled devices that were not formerly possible to reach in the past. The application could be as simple as
getting data from one end of the warehouse to the other, tying two buildings together, enabling communications in a tank
farm, or monitoring a SCADA system at a waste water plant.
Isolate and protect
Another great benefit inherently built into a media converter is the isolation factor. Since the data is communicating via a fiber
optic connection, the data is transmitted by light – therefore no conductive wires connect the far ends of the system. This
eliminates the potential for ground loop problems and offers additional protection from RFI/EMI interference that may be present
along the cable run. |
EIR Series -
Rugged DIN Rail Mount Media Converters
- New Gigabit option
- Meets NEMA TS1/TS2 requirements for traffic control equipment
- Meets IEC61000-6-2 EMC generic standard immunity for industrial environments
- Rugged DIN rail mount metal cases, with optional panel mount kit available
- Wide temperature ranges starting at -34 to 74 ºC (EIR-G-SFP-T supports -40 to 75°C)
- Alarm for power or port link failure via relay output (dry contact)
- Redundant 10 to 48 VDC inputs (via terminal blocks)
- Supports 2K MAC address (EIR-G-SFP-T supports 4K MAC address)
|
| Model Number |
Copper (RJ-45) Port |
Fiber Port |
Temperature |
Power Input |
|
Price
Change to Euros
|
Buy Now |
EIR-M-ST
|
10/100 |
Multi-mode (ST) |
-34 to 74°C |
10 to 48 VDC |
|
GBP 163.98
|
|
EIR-M-SC
|
10/100 |
Multi-mode (SC) |
-34 to 74°C |
10 to 48 VDC |
|
GBP 163.98
|
|
EIR-S-SC
|
10/100 |
Single-mode (SC) |
-34 to 74°C |
10 to 48 VDC |
|
GBP 277.69
|
|
EIR-G-SFP-T
|
10/100/1000 |
SFP (requires SFP module) |
-40 to 75°C |
12 to 48 VDC |
|
GBP 166.45
|
|
Accessories
Model No. |
Description |
|
Buy Now |
EIRPMKT
|
|
GBP 7.42
|
|
New! EIRSP1
|
|
GBP 62.62
|
|
MDR-40-24
|
|
GBP 42.02
|
|
SFP-1000LX-S-10KM-T
|
SFP Module, 1000Base-LX, Single-mode 10km, LC Connector (-40 to 85°C)
Datasheet
|
GBP 146.67
|
|
SFP-1000LX-S-20KM-T
|
SFP Module, 1000Base-LX, Single-mode 20km, LC Connector (-40 to 85°C)
Datasheet
|
GBP 175.51
|
|
SFP-1000SX-M-550M-T
|
SFP Module, 1000Base-SX, Multi-mode 550m, LC Connector (-40 to 85°C)
Datasheet
|
GBP 109.59
|
|
ENSP1F5
|
|
GBP 14.01
|
|
DR19RMKT
|
|
GBP 94.76
|
|
C5UMB3FBG
|
3 ft - Beige - Category 5e UTP Patch Cord Assemblies
|
GBP 2.88
|
|
C5UMB7FBG
|
7 ft - Beige - Category 5e UTP Patch Cord Assemblies
|
GBP 3.71
|
|
|
|
|
Ethernet
