|
|
For a wide-range AC/DC input, 5, 12 or 24 VDC output DIN Rail mount power supply ideally suited to these products, see these options.
|
|
Data acquisition monitor and control equipment
Driven by the need for continuous improvement in manufacturing floor and
machine efficiencies, demand for quality, real-time data acquisition systems
has increased steadily. With the increased factory floor utilization of
LAN-based systems with Ethernet or emerging wireless technologies,
the capability of monitoring, reporting, and control of embedded
machine-level sensors has become a possibility.
As monitoring becomes more commonplace, digital data acquisition and
Ethernet and wireless communications systems will be directly incorporated
within machines. However, before the future becomes reality, connecting
these advanced systems to legacy equipment with generic I/O or
RS-232/RS-485 outputs will require cost-effective analog-to-digital
media converters.
B&B Electronics offers a broad portfolio of data acquisition modules,
buffers, extenders, analog and serial I/O converters to meet the data
conversion requirements of the efficient factory floor revolution.
|
|
|
 |
| Home
> Products > ioLogik 4000 - Remote I/O Solutions for Data Acquisition and Control |
 |
Configure, control, monitor remotely and automatically via RS-485 or Ethernet - Up to 512 points on one system
Key Features
- Remotely acquire sensor data and control I/O points via Ethernet, RS-485, and RS-232
- Full range of digital and analog I/O modules
- Expandable up to 32 modules for a maximum of 512 DIO points or 124 analog channels
- Modular package for fast swap and maintenance
- Standard Modbus/TCP/RTU/ASCII
- Compatible with most SCADA software (Citect, iFix, inTouch, CIMPLICITY, etc.)
- Over current/temperature protection
- Easy-to-use DLL library for easy user programming
- 2 KV module-module isolation & watchdog timer
- Supports 10 host computers connection at the same time
Remote I/O Solutions for Data Acquisition and Control
ioLogik 4000 is designed to read sensor data and to control the on/off status
of devices via Ethernet or RS-485/232 remotely from a host computer or
PLC controller. Support for the standard Modbus protocol makes ioLogik
4000 compatible with most SCADA software, such as Intellution iFix,
Wonderware, and Labview.
Link the Real World and Digital World
ioLogik Ethernet I/O from Moxa connects a variety of sensors (temperature,
humidity, and light) and electrical, electronic, and mechanical devices
(pressure transmitters and motors), serial devices and more to computers
and applications over standard a Ethernet network and the internet.
ioLogik also provides a traditional RS-485 remote I/O server that works with
existing applications and, with the help of an NPort Wireless Device Server,
you can even connect sensors and devices via a wireless LAN network.
Easy-to-Use Windows Software Utility
ioAdmin is designed to configure and monitor the slice I/O server remotely. It
automatically detects the installed Ethernet I/O server and presents the
installation sequence of the I/O expansion modules. ioAdmin also detects
and generates a Modbus address table which can be printed or stored on a
computer for SCADA software configuration.
Fast Maintenance
ioLogik 4000 provides spring type, removable terminal blocks (RTB) that
allow you to preserve field wiring before replacing any I/O expansion
modules. Each I/O expansion module can be replaced in no time. |
Network Adapters
Model No. |
Description |
|
Buy Now |
NA-4010
|
|
|
NA-4020
|
|
|
NA-4021
|
|
|
Digital Inputs
Digital Outputs
Analog Inputs
Analog Outputs
Temperature Modules
Accessories
Model No. |
Description |
|
Buy Now |
M-7001
|
|
No Longer Available
|
M-7002
|
|
No Longer Available
|
M-7803
|
|
No Longer Available
|
M-7804
|
|
No Longer Available
|
M-7805
|
|
No Longer Available
|
M-7806
|
|
No Longer Available
|
M-8001-PK
|
|
No Longer Available
|
|
|
|
Ethernet